TILT Toilet Seat Lift Battery Powered

Ideal for bathrooms that don't have a wall A/C outlet near the toilet. This battery powered version uses reliable LINAK electronics and actuators for years of trouble-free
A must-have for anyone that has difficulty getting up from a commode by themselves. The TILT is a toilet lift solution that offers dignified bathroom safety. The seat lifts slowly and takes 15-20 seconds to reach the full-lift position.

Reliable LINAK components:
Tilt gets approximately 20 cycles on a full charge. The battery pack can be mounted within 3 feet of the TILT. Battery detaches from the wall mount and the offboard charger plugs directly into the battery for charging.

The TILT system is a powered lifting seat that helps you stand by yourself after using the toilet. All controlled with the easy to use hand pendant/control. Only 2 buttons on the hand control, up and down.

Moves the user 7-1/2” forward, which is ideal for clearing obstructions and rising from the bowl. This also positions the user’s shoulders over their feet for optimal balance and positioning.

The low angle of the unit allows for easier lateral transfers from mobile devices, chairs, transport chairs, and bath seats. In the down position, the arms are lower than the seat for a transfer board.

Unit accommodates users 5’2” to 6’4” and bowl heights from 14” to 21”.
TILT powered lifting system is for users weighing up to 325 lbs.

Choose between standard or elongated seats.

• Easy installation, less than 15 minutes
• Non-slip Hand Grips
• Available in round and elongated toilet bowls
• Fits user heights 5'2" to 6'4" and supports 325 lbs.
• The low angle of the unit allows for easier lateral transfers from mobility devices
• Assembly is protected by a plastic shield which can easily be removed for cleaning
• Made in the USA

Easy Installation

Installation takes less than 15 minutes and will require 3 tools:

1. 5/8" open-end wrench
2. 9/16" open-end wrench
3. Phillips screwdriver

---