Tub Mount Transfer Bench Swivel Seat

The Snap-N-Save Sliding Tub Mount Transfer Bench with Swivel Seat and Back.

Seat rotates 360°, and locks every 90° allowing easier entry to and exit from bench.

The base leg is adjustable to fit most tub heights and the seat height will be 5" from top of tub.

Transfer bench features a sliding seat, minimizing physical strain on the user and caregiver. Sliding distance is 8.5 inches.

Can be reversed for either right or left hand tub placement.

Molded plastic seat and back.

Seat platform slides smoothly over polished, high-strength aluminum tubes.

Tub Requirements:

1. Tub Wall Required Thickness: 2.75" - 5.75"
2. Tub Wall Height: 13" - 17.5"
3. Inside Tub Width at Top: 23" minimum
4. Inside Tub Width at Bottom: 16.5" minimum

Seat Height:
Seat height will be 5" above tub wall.

• Swivel seat turns 360 degrees, and locks every 90° allowing easier entry to and exit from bench
• Seat glides over polished, high-strength aluminum tubes
• Molded plastic seat and back
• Includes adjustable seat belt
• Rust-proof aluminum construction
• Adjustable height to fit bathtub
• One year limited warranty

Specifications:
Seat Size: 17" X 14.5"
Seat Height (low to high): 21.75" - 26"
Back Size: 14.75" x 7"
Base Length (Left-Right): 23" or wider tub required
Tub Wall Required Thickness: 2.75" - 5.75"
Tub Depth Required: 13" - 17.5"
Sliding Distance: 8.5"
Weight Capacity: 350 lbs

Available Accessories:
Armrest (single). For user safety, we recommend installing only one armrest on the seat on the opposite side of the leg frame with the handlebar.