Shower & Commode Chair goes into the shower. Constructed of high quality aluminum that won't rust.
Usually Ships in 1 to 2 Business Days
Product Code: 170-tilt-recline
Returns: No Returns on Bath Products.
Choose your options:
Frame Height Option
Tilt and Recline Shower Commode Chair
This EZee Life rehab shower/commode chair is constructed of lightweight aluminum that won't rust. It can safely go right into your shower without the fear of corroding. Featuring Seat Tilt from 0-20° and an adjustable headrest for patient comfort.
This product provides patient comfort with the added benefit of a reclining & tilting seat mechanism for excellent patient access and positioning.
Tilt & Recline: The tilt/recline feature of the 170 rehab shower commode can be used to reduce tone and for comfort of those users who have balance control problems or may move about in the seat too much to be safe when the seat is level.
Arms: The arms of the commode can be flipped up and back to aid in transfers or allow access by caregivers for bathing. The arms will stay raised when raised all the way.
Anti-Tippers: The anti- tippers are required to prevent the commode from tipping backwards when it is tilted back
Headrest: The headrest on this commode is referred to as an “X” headrest and the smaller end of the “X” is at the bottom to support the neck where it meets the back of the skull. The arms of this style of headrest can be flexed in or out as needed by simply pulling them apart or squeezing them together to provide more control or more freedom as needed. The angle of the headrest can also be adjusted.
Seat: Padded seat has removable key-insert. With insert removed this is a open style (horseshoe). Cushioned seat is sealed to prevent any moisture penetration.
Seat Belt: The seat belt supplied with the commode is known as a side release seat belt. To undo the buckle simply depress both release tabs at once and pull the two sides apart.
Tall Seat Height Option: The Tall Height option adds 2" to seat height/seat clearance.
Rolls over commode
Single lever tilt release
Molded seat, back & arm rest pads
Adjustable seat height
Adjustable molded headrest
Flip back arms
4 Locking swivel casters
Adjustable swing away footrest & Legboard
Flip up foot plates
Side release seat belt
Adjustable removable anti-tippers
All wheels are made of a hard rubber, not plastic.
Frame Material – Aluminum Seat Tilt Range – 0° to 13° from level Lower Back Recline Range – 90° to 111° from seat position Upper Back Angle – 15° posterior to lower back position Lower Leg Support Range– 90° to 50° from seat position Weight – 46.5 lbs (21.1 kgs) Wheels – 5” Locking Casters Seat Width – 18” Seat Depth – 17” Seat Height – 21.8” - 23.8” (adjustable) Footrest Hanger Angle – 60° Footrest Length – 14” to 20” (Infinite adjustment) Back Height – 16” Arm Height – 8” (from seat) Arm Length – 12.5” Arm Pad Length – 11.75” Weight Capacity – 286 lbs (130 kgs)