PressureGuard Custom Care Non-Powered Mattress

Category: Reactive Pressure Redistribution Surface

Better surface. Better care.

If you’re considering a non-powered reactive pressure redistribution surface, choose the one that is designed to outperform the others. Span-America’s PressureGuard Custom Care surface provides effective, non-powered pressure redistribution through its outstanding combination of a zoned, shear-reducing, engineered outer shell surrounding a reactive support chamber system.

Custom Care’s unique Metered Immersion design reacts to changes in surface loading through a series of interconnected longitudinal support chambers. As the user moves or repositions on the surface, the chambers below react in concert – deflecting, transferring air, and venting – in relation to the user’s weight and position. The result is a blend of pressure management, shear reduction, comfort, and ease of operation not achievable with other non-powered systems.

The PressureGuard Custom Care mattress system provides a cost-effective solution where add-on powered modalities are not desired. Incorporates the cover and outer shell design innovations found in the convertible series, but with a support cylinder design similar to typical non-powered reactive systems.

Primary Use:

• Recommended for use in prevention and treatment of Stage I and II pressure ulcers, and treatment of uncomplicated Stage III and IV ulcers with multiple turning surfaces.

Patient Indications:

• Can be positioned off of ulcer in at least 2 positions
• Highest risk for skin breakdown, or severely compromised (e.g. Braden score 12 or less)
• History of pressure ulcer(s)
• Repositions infrequently
• Poorly padded bony prominences

Key Advantages:

• Minimal shearing through Geo-Matt surface geometry and Shear Transfer Zones on bi-directional stretch cover
• Maintenance-free support chambers require no adjustment or refilling
• No initial set-up necessary

Models/Sizes:
NP803629: 80”L x 36“W x 7”H
NP753629: 75”L x 36“W x 7”H
NP843629: 84”L x 36“W x 7”H
NPCA8029: Custom Care 80” for CareAssist
NPCA8429: Custom Care 84” for CareAssist

Specifications:
Weight Limit: Supports up to 500 lbs
Mattress height: 7"
Mattress weight: approx. 23 lbs

Flammability: Conforms to NFPA 101 (Life Safety Code); CalTech bulletins # 117, 129, and 603; CPSC 16 CFR Parts 1632 and 1633

All models are fire barrier version (FBV) as indicated by “-29” suffix, denoting certified conformance to NFPA 101 (Life Safety Code); Cal Tech Bulletin #117; 16 CFR Parts 1632 and 1633; and BFD IX-11.



California Prop 65 Warning