Home > Beds > Therapeutic Support Surfaces > Group II Products >

microAIR MA50 Alternating Pressure Overlay

microAIR Alternating Pressure Mattress Overlay MA50
microAIR Alternating Pressure Mattress Overlay
Invacare MA50


 
Move your mouse over image below:


microAIR MA50 Alternating Pressure Mattress Overlay is a Group II Support Surface
List Price: $995.00
Our Price: $749.00
You save $246.00!


Availability: Usually Ships in 1 to 2 Business Days
Product Code: INVACARE-MA50

Description Specs
 

microAIR MA50 Mattress Overlay

microAIR Alternating Pressure Mattress Overlay System.

Economical alternating pressure mattress overlay system w/10 LPM Compressor.

The MA50 is a Group II support surface and has a 350-lb weight capacity.

Alternating Pressure:
The microAIR MA50 APM provides pressure relief in the prevention and treatment of pressure ulcers. This Alternating Pressure Overlay System attaches to the top of a standard mattress. The MA50 mattress is 5" high. This 5-inch additional height may effect bed rail's usable height or functionality.

Quality Product Construction:
The microAIR MA50 is a good cost effective overlay system. This powered mattress overlay has 16 five inch bladders covered in 70 denier quilted nylon for comfort. Treatment times are 5, 10, 15, and 20 minute cycles. The non-skid bottom is secured with elastic hold-downs. When rolled up for storage, carrying handles allow for easy transport.


microAIR Control Panel:

MA50 Control Panel


microAIR Control Panel. Treatment times are 5, 10, 15, and 20 minute cycles.

Alternating Pressure Mode:
The alternating pressure times indicate the frequency of deflation or inflation of half of the air cushions (even or odd numbered). For example, 10 minutes is selected. In this example, the even numbered air cushions in the mattress will deflate, while the odd numbered cushions remain at constant pressure. When 10 minutes has elapsed, the even numbered air cushions will inflate while the odd numbered cushions remain at constant pressure. When 10 minutes has elapsed again, the odd numbered air cushions deflate while the even numbered cushions remain at constant pressure. The air cushions continue to inflate or deflate like this as long as an alternating pressure time has been selected. At all times, half of the air cushions remain at a constant pressure when an alternating pressure time has been selected.

Static Mode:
all air cushions in the mattress are maintained at constant pressure. The Static LED is illuminated GREEN.

Minimum Pressure Setting:
The minimum pressure setting during Alternating Pressure is set to 0 (2 mmHg) at the factory. This means that the mattress will deflate as much as possible during the deflation time when using 10, 15 or 20 minute Alternating Pressure times. The setting can be changed so the mattress will only deflate to 50% of the selected pressure setting.

Fowler:
Press the Fowler button to activate the patient Fowler Mode. When this mode is activated, the control unit increases the pressure in the mattress to prevent the patient from bottoming out .


microAIR Mattress Overlay:

The waterproof cover is made of non-shear nylon and has nylon tie down straps with buckles for attaching the mattress to the bed. The mattress has a 16 bladders, each bladder is 5" thick. In addition, there is a 2" foam safety pad under the nylon cover.

This microAIR mattress overlay has a non-skid bottom and is secured with 10 nylon web buckled hold-downs. When rolled up for storage, carrying handles allow for easy transport.

Standard Hospital/Homecare Bed Size:
Affordable with added comfort, this alternating pressure mattress is available in the standard 36" x 80" size (Twin XL).

Product Features


  • Quilted 70 denier nylon cover helps protect user from friction and shear.
  • Non skid bottom as well as 10 nylon web buckled hold downs secure mattress to bed.
  • 10 LPM compressor has alarm, alarm silence, and lock out features.
  • 16 - 5" Bladders.
  • Dimensions: 36" x 80" x 5"
  • Treatment times are 5, 10, 15, and 20 minute cycles.
  • Product rolls up for easy storage and handling. Attached over-shoulder carrying strap makes for easy transport.


infoGuide to all Invacare microAIR MA Series Mattress Systems

Downloads:

pdfMA50 Owner's Manual (opens in new window)
Returns
Return Policy for microAIR MA50
This product has a limited 30-day return policy:
  • The mattress must bed unused
  • Mattress is not returnable if package/seal has been opened
  • must be returned in original packaging and at customer's expense
  • Restocking fees apply

If you have questions about this product or need qualified help choosing options please call us at 1-866-722-4581.
See the full Return Policy here: Return Policy
Warranty
Invacare MA50 Warranty
  • 1 Year mattress
  • 2 years on power unit

If you experience any problem with your MA50 Mattress at any time regardless of the stage of your warranty, please contact us and we will make every effort to help you.

This warranty applies to the original purchaser and must be purchased from an authorized Invacare supplier.



Share your knowledge of this product with other customers... Write a review.

Browse for more products in the same category as this item:

Beds > Therapeutic Support Surfaces > Group II Products
Beds > Hospital Bed Mattress > Mattress Overlay
Beds > Hospital Bed Mattress
Beds > Therapeutic Support Surfaces
Beds