 |
 |
 |
|
Full Electric Home Care Hospital Bed
Head, Foot, and Bed Height are Fully motorized and adjustable with hand pendant. All positions are controlled electronically for patient/caretaker ease and convenience. The ergonomic hand pendant lets the user control all functions and it controls the positioning of the upper body and/or knees.It comes with a heavy duty, waterproof cord and adjusts the bed frame for height adjustments to facilitate safe transfers and efficient use of accessories.
The easy to set up full electric hospital bed offers long-term savings with durable and washable materials reducing repair and cleaning costs. It also allows interchangeable parts and the low voltage motor provides a quiet and more efficient system.
High impact bed end panels are more durable, impact and scratch resistant and washable for easy cleaning.
The bed accommodates 450 lbs. and its height is 21" - 29" from top of mattress to floor.
A manual crank is also provided in case of an electrical failure.
Warranty: 5 years on welds, 2 years on Mechanical/Electrical
|
Height:
|
15" min., 23" max. (without mattress)
|
|
Mattress height:
|
6"
|
|
Maximum back angle:
|
70 degrees
|
|
Maximum knee angle:
|
40 degrees
|
|
Overall Length:
|
88" (80" sleep surface)
|
|
Overall Width:
|
36"
|
|
Split Springs to Ends:
|
Head 43"
|
|
Foot 44 1/2"
|
|
Head-End Height:
|
28 7/8" min. 37 1/4" max.
|
|
Foot-End Height:
|
26 1/4" min. 35 1/2" max.
|
|
Weight Capacity
|
450-lbs
|
|
BPCODE
|
214680
|
Shipping cartons:Head Spring section: 36" x 44" x 8" Foot section: 37" x 47" x 8" Bed Ends: 25" x 39" x 7"
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features
- Reinforced head-spring provides maximum bed strength and support
- Easy-release motor mounts allow quick motor removal
- Durable casters increase mobility and provide secure locking
- Reinforced corner-plates prevent bending
- Quiet motor operation and fast cycle time on lowering height of bed for efficient bed set-up
- Synchronization, split-spring design, and interchangeability ensure easy use, setup, and operation
- Robotically welded steel frame construction
- Pinch-free design ensures safety for patients and caregivers
- Operating capacity 450 lbs.
- UL73 and CSA approved
Bed Safety Rail Options:
This bed accepts both Full or Half rails. Half rails are usually desirable if the user is going to get in/out of bed by themselves without assistance, since they will be able to access/release the button to lower the rail. Full length rails require an attendant to release the rail for lowering.
Specifications: use the Technical Specs Tab above.
This adjustable hospital bed is maintenance-free and designed for patient comfort.
Unsurpassed in quality, each Home Care bed is built to provide ease of use, patient comfort, and years of trouble-free product performance. All positions are controlled electrically to provide greatest convenience for the patient and ease to the caregiver. The hand pendant controls the positioning of the upper body and or knees, and can be placed anywhere for maximum patient comfort. The pendant control also adjusts bed-frame height for efficient use of accessories and for safe and easy transfer.
|
Weight Capacity
|
Sleep Surface Width/Length
|
Height Range w/o Mattress
|
Shipping
|
Estimated Delivery Time
|
Warranty
|
|
450 lbs.
|
36" x 80"
|
15" - 23"
|
Free
|
5-7 days
|
5 Years Limited
|
 5410IVC Owners Manual
Assembly: Hospital Beds require assembly.
See How to Setup a Hospital Bed
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
Our New Bed Review 
Good but doesn't fully meet my requirements