Oxygen Home Fill System Devilbiss iFill

iFill System without Cylinders.

The iFill Personal Home Fill Oxygen Station offers the flexibility to fill most cylinder sizes including M6,ML6,C,D and E.

iFill lets users fill their cylinders in just a little over an hour - not the two hours it can take with other in-home oxygen filling units. Shorter fill times save energy costs. Partially filled cylinders can be easily topped off. And the iFill will automatically shut off when filling is complete.

Cylinders can be refilled as often as needed.

No Concentrator needed.
The iFill unit extracts purified oxygen from room air using standard oxygen concentrator technology.

How the iFill works:
The DeVilbiss iFill Personal Oxygen Station uses a dual-pressure head compressor to simultaneously power a pressure swing adsorption oxygen generation system and a pneumatic pressure intensifier. It is designed to provide supplemental oxygen to fill portable cylinders for ambulatory use.

Oxygen cylinders are attached to the iFill unit with a coupler and cylinder nipple set. The application-specific coupler helps to insure that other cylinders cannot inadvertently be connected to the iFill system.

The iFill station is designed to fill various sizes of portable oxygen cylinders. Cylinders are available with an integrated oxygen conserving device or continuous flow regulator mounted on top.

An onboard Oxygen Sensing Device (DeVilbiss OSD®) monitors the oxygen concentration level to insure that it remains within specification (93% ± 3%).

Warranty: 3 years or 3000 hours, whichever comes first.

California Residents: California’s Proposition 65 initiative
Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Please note:
A Proposition 65 warning does not necessarily mean a product is in violation of any product-safety standards or requirements.