Invacare ML6 Cylinder for HomeFill

Invacare - ML6 Cylinder w/Post Valve for HomeFill

Designed and setup to work with the Invacare Home-Fill System.

HomeFill compatible Post Valve Cylinder - ML6 size.
The HomeFill post valve cylinder will accommodate any CGA870 compatible regulator or conserver. This post valve cylinder is only for use with the HomeFill oxygen compressor.

The Invacare HomeFill(TM) II complete home oxygen system revolutionizes ambulatory oxygen by allowing patients to fill their own high-pressure cylinders from a concentrator. The HomeFill is a multi-stage pump that simply and safely compresses oxygen from a specially equipped Invacare 5-liter concentrator into oxygen cylinders in sizes ML4,M6,ML6 and M9(C). The ability to fill their own cylinders gives ambulatory patients greater independence and freedom.

Typical ML6 Cylinder usage times:

	Use Times (Shown In Hours)
Flow Rate:	1	1.5	2	2.5	3	4	5	6
ML6 Cylinder
Pulse Dose	8.6	5.7	4.3	3.4	2.9	2.1	1.7	1.4
Continuous Flow	2.8	1.9	1.4	1.1	.9	.7	.6	.4
This chart is intended to be used only as a guide. Based on 20 BPM.

Specifications:

Overall Height:	11 inches
Diameter:	4.4 inches
Product Weight:	4 lbs.
Capacity:	170 liters
Cylinder Filling Times:	75 minutes
Warranty:	post valve - 3 years, cylinder - 1 year

Downloads:
HF2POST6 Owner Manual


See also: Patient Convenience Pack - ML6 Cylinder (ML6 cylinder w/Conserving Device installed.)