 |
 |
 |
|
BioSole-Gel Soft Orthotic
A 3/16" thick orthotic covered with a soft EVA foam, similar in its characteristics to Plastazote, but far superior in its durability. It is ideal for Diabetic, Arthritic and Geriatric patients.
These BioSole-Gel Orthotics are self-forming with Polyurethane Foam and
Viscoelastic Gel to dynamically shape to the foot. The BioSole is a
3/16" orthotic, designed for shoes with removable inserts or shoes with
extra room.
A bladder construction, filled with polyurethane foam and viscoelastic
gel, shapes dynamically to the contours of the foot without bottoming
out.
Special design for heel pain relief.
A deep contoured heel-seat, padded with gel, along with a special
recess under the heel alleviate the pressure on the calcaneus and
protects the heel against impacts.
Interactive Posting.
A variety of posts can be easily attached to the bottom of the orthotic to fine tune the alignment of the foot on site.
Orthofeet offers a unique Interactive Posting Technique, which provides
the best control of foot function. The basic concept of this technique
is that a variety of pre shaped extrinsic posts can be added to the
bottom of the orthotic to align the foot in a desired position (i.e.:
“Neutral Position”). The foot function is then checked, while the
patient is walking with the orthotic. This allows you to fine tune the
alignment of the foot in a trial and error process, based on both your
assessment and the patient's feedback.
The posts are available in 3, 4 and 5 degrees, and comprise a strong
pressure-sensitive adhesive for easy application. They come in two
different forms: Posting Strips and Rear Foot Posts. The Posting Strips
are 3" wide and 17" long. Any type of posting, such as rear foot,
forefoot, medial or lateral can be trimmed from the strip and easily
attached to the appropriate location on the bottom of the orthotic. The
Rear Foot Posts are pre-cut to fit the shape of the heel portion of the
orthotic and do not require trimming. They are specially designed to
facilitate the application of the commonly used rear foot Varus posts.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features
- Self-Forming Arch-Support: A bladder construction, filled with polyurethane foam and viscoelastic gel, shapes dynamically to the contours of the foot without bottoming out.
- Thermo-Formable Top-Cover: A durable Rubberized EVA foam provides superb cushioning and even pressure distribution of body weight. If necessary, the orthotic can be thermo-formed directly to the foot using a Heat-Gun or a toaster oven.
- Heel-Pain Relief: A deep contoured heel-seat, padded with gel, along with a special recess under the heel alleviate the pressure on the calcaneus and protects the heel against impacts.
- Interactive Posting: A variety of posts can be easily attached to the bottom of the orthotic to fine tune the alignment of the foot on site.
|
|
|
|
|
|
|
orthotics 
