Lift Serial Number
|
| |
Serial Number Required (Located on Lift's frame, not on any of the electrical components. S/N usually starts with 2 alpha characters)
|
Battery Charger
|
| |
Charger Unit, WP-PL400EL-ADP [Add $89.90]
|
Apex Battery Packs
|
| |
Internal Batteries (pair), WP-PL400EL-BAT [Add $139.00]
|
Charger Adapter Cable
|
| |
Adapter cable for charger, DPL650ADP-CABLE [OUT OF STOCK til 6/23] [Add $58.00]
|
Fit All Apex/BestCare Lifts
|
| |
Hand Control/Pendant, WP-PL400EL-PEN [Add $94.50]
|
| |
Lift Sling Storage Bag, canvas, WP-PL400E-BAG [Add $35.00]
|
Genesis 400 Series
|
| |
Hydraulic Pump, WP-PL400H-PUMP [OUT OF STOCK til 4/20] [Add $299.00]
|
| |
Electric actuator, DPL400LE-ATR [Add $395.00]
|
| |
Control box gray with PCB, WP-PL400EL-BOX [Add $348.00]
|
| |
PCB board only no box, WP-PL400EL-PCB [Add $224.00]
|
| |
Front castor 3", WP-PL400H-FC [Add $42.00]
|
| |
Rear castor with brake lock 4", WP-PL400H-RC [Add $49.00]
|
Parts for 450LE Series
|
| |
Electric actuator, DPL400LE-ATR [Add $395.00]
|
| |
Control box gray with PCB, WP-PL400EL-BOX [Add $348.00]
|
| |
PCB board only no box, WP-PL400EL-PCB [Add $224.00]
|
| |
Front castor 3", WP-PL400H-FC [Add $42.00]
|
| |
Rear castor with brake lock 4", WP-PL400H-RC [Add $49.00]
|
Parts for Stella Lift, 1230
|
| |
Electric actuator, WP-TA23-SA400, WP-TEC-JPM (plug) [Add $344.00]
|
| |
Control box with PCB, WP-PL400EL-BOX [Add $348.00]
|
| |
PCB board only no box, WP-PL400EL-PCB [Add $224.00]
|
| |
Front castor 3", WP-PL400H-FC [Add $42.00]
|
| |
Rear castor w/brake 4", WP-PL400H-RC [Add $49.00]
|
| |
Knee Pad, WP-SA400E-KNPD [Add $105.00]
|
Parts
|
| |
Knee Strap, WP-SA400E-KB [Add $49.00]
|
Parts for Stella Lift, 1230
|
| |
Footplate, WP-SA400E-FTPLT [Add $165.00]
|
| |
Boom arm, WP-SA400E-BOOM [Add $177.00]
|
Parts Stella Lift HD, 1260
|
| |
Electric actuator, SAL1260HD-ATR [Add $405.00]
|
| |
Control box with PCB, SAL1260HD-BOX [Add $348.00]
|
| |
PCB board only no box, SAL1260HD-PCB [Add $194.00]
|
| |
Front castor 3", WP-PL400H-FC [Add $42.00]
|
| |
Rear castor w/brake lock 4", WP-PL400H-RC [Add $49.00]
|
| |
Knee pad, WP-SA600E-KNPD [Add $140.00]
|
| |
Footplate, WP-SA600E-FTPLT [Add $177.00]
|
| |
Boom arm, WP-SA600E-BOOM [Add $198.00]
|
Parts for 650HD Lift
|
| |
Electric actuator, WP-PL600E-ATR [Add $487.00]
|
| |
Control box with PCB, WP-PL400EL-BOX [Add $348.00]
|
| |
PCB board only no box, WP-PL400EL-PCB [Add $224.00]
|
| |
Front castor/for low base 3", WP-PL400-DFC3 [Add $44.00]
|
New wheels 
Hoyer hand control