Home > Beds > Therapeutic Support Surfaces > Group II Products >

AltaDyne Sensor Plus Mattress Replacement System
AltaDyne Sensor Plus
AltaDyne Sensor Plus
Alternating Pressure Mattress #765000

Move your mouse over image below:

AltaDyne Sensor Plus
Mattress Replacement System #765000

Returns: No returns on this product.

Availability: Usually Ships in 1 to 2 Business Days
Product Code: ALTADYNE-765000


AltaDyne Sensor Plus Alternating Pressure Mattress

Group II Alternating Pressure Mattress with Active Sensor Technology.

AltaDyne Sensor Plus combines dynamic Alternating Pressure Therapy with revolutionary Active Sensor Technology for continuous, effective pressure relief provides prevention and active treatment of pressure ulcers.

Intelligent, alternating pressure relief support surface that uses a proprietary Auto-Adjusting technology, used to automatically configure air pressure based on patient weight, relieving caregivers of any manual setup and assuring maximum comfort for the patient.
  • Aid in the treatment and prevention of stage 1, 2, 3 and 4 pressure ulcers while optimizing user comfort.
  • Pain management as prescribed by a physician.
  • For use in either a homecare or long-term care setting.

Mattress size: standard 78.7"L x 35.4"W x 8"H fits all standard hospital beds.
Weight capacity: 400-lbs

See: Alternating Pressure Mattress Description and Functionality

Product Features

  • Group II mattress system suitable for use in the prevention and treatment of pressure ulcers
  • Touch pad adjustment with LED indicators
  • Cycle Time: 10 minutes
  • Fine tuning function to manually adjust the air pressure settings
  • Four therapy settings including, Alternating pressure, Static, Alternating + Seat Inflation or Static + Seat Inflation
  • Lockable control panel to prevent unauthorized adjustment changes
  • Cell-on-cell design ensures that the mattress will hold air in the lower cells in the event of a power failure, preventing the user from bottoming out
  • Low pressure and power failure LED indicators and audible alarms
  • Quilted nylon PU cover is vapor permeable and fluid resistant
  • Quick CPR deflation is accomplished by simply disconnecting the quick-connect hose couplings from the control unit and/or releasing CPU tabs
  • Electrical rating: 120 VAC/ 60Hz
  • UL60601-1 and CSA C22.2 listed
  • Air input > 8 lpm
  • 400 lb maximum weight capacity
  • Designed to meet the requirements of HCPCS code: E0277
  • Meets CA Technical Bulletin #117 flammability requirements
  • 1 year limited warranty
  • Latex Free
Power Supply: AC 120V 60 Hz 0.17A
Fuse Rating: T1A, 250V
Cycle time: Fixed / 10 minutes
Pump Dimensions (L x W x H): 11.4" x 7.9" x 4.6"
Mattress Dimensions (L x W x H): 78.7" x 35.4" x 8"
Pump Weight: 5-lbs
Operating Temperature: Operation: 50F to 104F
Classification: Group II Mattress System
Warranty: 12 months

Front Panel - Controls

Auto Adjust Button:
The auto-adjust button adjusts the mattress pressure automatically based on the patient's weight. To remind the user that the auto-adjust process is ongoing, the auto-adjust indicator LEDs will periodically flash from left to right until the Ready LED illuminates to show the process is complete.

When auto-adjust is complete, the Ready indicator will illuminate. To disable the auto-adjust function, press the autoadjust button until auto-adjust indicators de-illuminate.

Tuning Button:
The tuning button fine-tunes the mattress system's auto-adjusted pressure. The tuning function is only available in alternate and static therapy modes. Three tuning settings are available:
  1. System auto-adjusted pressure.
  2. One level softer than auto-adjusted pressure.
  3. One level firmer than auto-adjusted pressure.
Therapy Adjust Button:
The therapy adjust button selects the therapy mode. After power-up, the system automatically inflates the mattress, auto-adjusts the pressure, and enters alternate therapy mode. To then cycle among the therapy settings, press the therapy adjust button to select static therapy mode; press again to select alternate + seat inflation therapy mode; press again to select static + seat inflation therapy mode; press again to select alternate therapy mode, etc.

For more operational information download the Sensor Plus Owners Manual

Share your knowledge of this product with other customers... Write a review.

Browse for more products in the same category as this item:

Beds > Therapeutic Support Surfaces > Group II Products
Beds > Therapeutic Support Surfaces
Beds > Therapeutic Support Surfaces > Group II Products > Alternating Pressure