 |
 |
 |
|
microAIR Alternating Pressure Mattress with on demand Low Air Loss
with 50 LPM Compressor
Inavcare MA65
Economical alternating pressure mattress replacement system. This Group II support surface has a 1000-lb weight capacity. Mattress consists of 20 - 8" Bladders.
Alternating pressure therapeutics support system with on demand low air loss, 50 LPM compressor, automatic pressure monitoring and automatic wireless fowler.
The microAIR APM provides pressure relief in the prevention and treatment of pressure ulcers.
microAIR Technology:
 New
wireless fowler technology, real time pressure monitoring and energy
conserving power units combine to make microAIR surfaces the most
efficient dynamic support surfaces in the market. Within the power
units is a pressure transducer that maintains surface pressure not to
exceed 32mm/Hg. The solenoid valve within the compressor opens and
closes the air valve automatically to maintain the pressure relief
range prescribed. The compressor turns off to save energy when the
patient is in the range.
Wireless Fowler Technology is an
innovation exclusive that assures patient comfort. From time to time
patients need to sit up in bed, which creates the problem of additional
pressure in the coccyx area and possible disruption of treatment.
Working
in sync with the power unit, the transmitter installed in the head
section of the mattress signals the power unit when the head portion
begins to raise. The power unit immediately begins adding 25% more air
to the mattress to prevent patient contact with a hard surface.
microAIR Control Panel:
microAIR Control Panel. Treatment times are 5, 10, 15, and 20 minute cycles.
Alternating Pressure Mode:
The alternating pressure times indicate the frequency of deflation or inflation of half of the air cushions (even or odd numbered). For example, 10 minutes is selected. In this example, the even numbered air cushions in the mattress will deflate, while the odd numbered cushions remain at constant pressure. When 10 minutes has elapsed, the even numbered air cushions will inflate while the odd numbered cushions remain at constant pressure. When 10 minutes has elapsed again, the odd numbered air cushions deflate while the even numbered cushions remain at constant pressure. The air cushions continue to inflate or deflate like this as long as an alternating pressure time has been selected. At all times, half of the air cushions remain at a constant pressure when an alternating pressure time has been selected.
Static Mode:
all air cushions in the mattress are maintained at constant pressure. The Static LED is illuminated GREEN.
Minimum Pressure Setting:
The minimum pressure setting during Alternating Pressure is set to 0 (2 mmHg) at the factory. This means that the mattress will deflate as much as possible during the deflation time when using 10, 15 or 20 minute Alternating Pressure times. The setting can be changed so the mattress will only deflate to 50% of the selected pressure setting.
microAIR Mattress:
The waterproof cover is made of non-shear nylon and has nylon tie down straps with buckles for attaching the mattress to the bed. The mattress has a 20 bladders.
In addition, there is a 2" foam safety pad under the nylon cover.
This microAIR mattress has a non-skid bottom and is secured with 10
nylon web buckled hold-downs. When rolled up for storage, carrying
handles allow for easy transport.
Standard Hospital/Homecare Bed Size:
Affordable with added comfort, this alternating pressure mattress is available in the standard 36" x 80" size (Twin XL).
|
|
|
|
|
|
 |
|
 |
|
Features:
- Automatic wireless fowler prevents patient from bottoming out when bed is articulated.
- 50 LPM compressor has alarm, alarm silence, and lock out features as well as static mode
- Pressure is continuously monitored to maintain proper pressure redistribution based on patient weight.
- Quilted 70 denier nylon quilted cover, nylon buckle straps, and built in carrying straps.
- Treatment times are 5, 10, 15. 20 minute cycles
- 20 - 8" Bladders
- Dimensions: 36" x 80" x 8"
Specifications:
| Product Weight
Capacity: |
1000 lbs
|
|
| Warranty: |
1 year on mattress, 2 years on
compressor
|
|
| Overall Height: |
10"
|
|
| Overall Width: |
36"
|
|
| Overall Length: |
80"
|
|
|
|
 |
|
 |
|
|
|
