Home > Ramps > Threshold Ramps >

EZ Access - Rubber Threshold Ramp

EZ Access Rubber ThresholdWheelchair Ramps
EZ-Access Rubber Threshold Ramps
Shown with 2ea. Threshold Ramps and Pair Risers


 
Move your mouse over image below:


EZ-Access Rubber Threshold Ramps
Doorway and Sliding Glass Door ramps

Our Price: $158.95

Returns: No returns on this product.


Availability: Usually Ships in 24 to 72 Hours
Product Code: EZ-RUBBER-THRESHOLD

Ramp Configuration

1 ea. Ramp [2.5" Rise]
2 ea. Ramps and 1set Risers [4.75" Rise] [Add $312.95]

 
Description
 

Modular Entry Mat Rubber Threshold Ramp

Available in rise of 2.5", or 4.75" heights with use of riser.

These rubber threshold ramps are ideal for Scooters, Wheelchairs, Rolling Walkers, or just walk-up ramps that prevent tripping and falls.

Made of 100% recycled rubber, the EZ-Access brand threshold ramps work both indoors and outdoors to provide a smooth transition.

Durable modular ramps are designed for doorways, sliding glass doors, and raised landings. Threshold ramps may be used either one by itself or two combined to make entry and/or exit convenient and safe. Simply measure the height of the door entry and choose the correct size. Ramp length is proportional to ramp height.

Ramp simply sits against the doorsill (inside or outside) to provide a smooth transition and is especially practical for sliding glass doors because it does not interfere with the door track. Made of 100% recycled tires, EZ-ACCESS Rubber Threshold ramps are ADA approved, slip-resistant and designed for years of continued use. Standard width is 48 (for wider entrances, simply place 2 ramps side-by-side). Ramp can easily be trimmed for lower heights and widths to fi t any entrance or threshold. Ideal for indoor and outdoor use and, because it is fully portable, can easily be moved to another door or location if desired.

How to fit Threshold Ramp
Ramps can be cut to specific height. If you want to make them permanent simply use the set of Phillips head screws and concrete anchors. Easy installation in wood or concrete.



How to size:
The ramps are 2.5" rise in height. Use 2 ramps with a set of risers to get to 4.75" rise. You can add additional ramps and risers to increase the height. The Ramps are 2.5" and the Risers are 2.25" so you can play with variations needed for your particular height requirement. In the picture below, see the pair of risers underneath the ramp marked "2"


Rubber Thresold Ramp





SPECIFICATIONS

THR 250-1 THR RISER 225-1 PR
Made of 100 % recycled rubber
Non-skid surface
Modular design
Limit of use (rise) 2"x24"x48" 24"x24"x2.25" (2ea)
Lengths 24" 24"
Ramp weight 40-lbs 23-lbs
Ramp width 48" 24" (x2)
Weight capacity (pounds) 850 850



Share your knowledge of this product with other customers... Write a review.

Browse for more products in the same category as this item:

Ramps > Threshold Ramps
Ramps