The Hoyer SS-HSP is an easy-to-use hydraulic-powered lifting mechanism which allows for recreational and therapeutic swimming. The Hoyer Classic Pool Lift is easily operated by an attendant and not intended to be used by the patient without help.
The SS-HSP comes with an in-ground mount that can be used when you pour your deck. Otherwise, for existing decks use the surface mount. The Lift is designed to be used with an in-ground pool and will not work with an above ground pool unless there is a deck installed.
Hoyer Classic Pool Lift Operating Instructions
To use the Hoyer Swimming Pool Lifter, remove the cover from the floor sleeve and insert the nylon bearing socket. Insert the mast of the lifter into the socket. Attach the long chains to the swivel bar. To use the Hoyer Sling #112-D, place the sling under the person being lifted so that the end of the seat comes to the person’s knees. Attach the ends of the chains to the swivel bar and the S-hooks to the sling. When the person is lifted so that he/she just clears the chair, the lifter boom should be almost at maximum height. The person being lifted can then be lowered the full 62”.
Installation: All sleeves are supplied for flush installation with flush cover. For mounting location instructions and directions on installing the cement-in sleeve download the Hoyer Pool Lift Installation Manual
Hoyer SS-HSP Classic Pool Lift and Accessories.
PHC Preferred Health Choice
500 N. 56th St. Suite 10 Chandler, AZ 85226
