 |
 |
 |
|
microAIR Alternating Pressure Mattress Replacement with on demand Low Air Loss
Economical alternating pressure mattress replacement system
The microAIR APM provides pressure relief in the prevention and treatment of pressure ulcers. This Group II support surface has a 250-lb weight capacity.
This microAIR Alternating Pressure Mattress has 16 horizontally configured bladders. Mattress will not bottom out with mattress hose attached to the compressor power unit.
This alternating pressure mattress provides a temperate climate for patients with its ability to circulate air within the mattress.
microAIR Control Panel:
microAIR Control Panel. Treatment times are 5, 10, 15, and 20 minute cycles.
Alternating Pressure Mode:
The alternating pressure times indicate the frequency of deflation or inflation of half of the air cushions (even or odd numbered). For example, 10 minutes is selected. In this example, the even numbered air cushions in the mattress will deflate, while the odd numbered cushions remain at constant pressure. When 10 minutes has elapsed, the even numbered air cushions will inflate while the odd numbered cushions remain at constant pressure. When 10 minutes has elapsed again, the odd numbered air cushions deflate while the even numbered cushions remain at constant pressure. The air cushions continue to inflate or deflate like this as long as an alternating pressure time has been selected. At all times, half of the air cushions remain at a constant pressure when an alternating pressure time has been selected.
Static Mode:
all air cushions in the mattress are maintained at constant pressure. The Static LED is illuminated GREEN.
Minimum Pressure Setting:
The minimum pressure setting during Alternating Pressure is set to 0 (2 mmHg) at the factory. This means that the mattress will deflate as much as possible during the deflation time when using 10, 15 or 20 minute Alternating Pressure times. The setting can be changed so the mattress will only deflate to 50% of the selected pressure setting.
microAIR Mattress:
The waterproof cover is made of non-shear nylon and has nylon tie down straps with buckles for attaching the mattress to the bed. The mattress has a 16 bladders, each bladder is 6" thick. In addition, there is a 2" foam safety pad under the nylon cover.
This microAIR mattress has a non-skid bottom and is secured with 10 nylon web buckled hold-downs. When rolled up for storage, carrying handles allow for easy transport.
Standard Hospital/Homecare Bed Size:
Affordable with added comfort, this alternating pressure mattress is available in the standard 36" x 80" size (Twin XL).
|
|
|
|
|
|
 |
|
 |
|
Features:
- Product rolls up for easy storage and handling. Attached over-should carry strap allows for easy transport.
- Mattress is secured with 10 nylon buckled straps and has a non skid bottom.
- Quilted 70 denier nylon cover helps protect user from friction and shear.
- 10 LPM compressor has alarm, alarm silence and lock out features
- Treatment times are 5, 10, 15, and 20 minute cycles.
- 16 - 6" Bladders
- Dimensions: 36" x 80" x 8"
Specifications:
| Overall Height: |
8"
|
|
| Overall Width: |
36"
|
|
| Overall Length: |
80"
|
|
| Flammability: |
16 CFR 1632 and 16 CFR 1633
Compliant
|
|
| Product Weight
Capacity: |
250 lbs
|
|
| Warranty: |
2 years on compressor, 1 year on
mattress
|
|
| Typical Use: |
Prevention and treatment of pressure
ulcers
|
|
|
|
 |
|
 |
|
|
|
